Dear customers, Please kindly have an alert that according to our project experience, we foresee that many ICs will be in very tight supply or even out of stock for a long time, so please schedule your crucial projects of 2021 beforehand. : For more details, please have an alert to this news, down load Electronic Components Price Increase Reminder_Weller Technology Co., Limited

Standard PCB

Founded in 2006, Weller Technology is Committed to provide leading manufacturing service of circuit board to our customers. Benefit from our continuous invest in advanced production equipment and skilled people, today we have the manufacturing capability to produce 2-50 layers PCBs, including standard PCB, prototype PCB, Rigid and Rigid-Flex PCB, Single sided and multilayer PCB, HDI PCB, backplane PCB, metal-backed PCB etc., and covered almost all types of substrate materials, including FR-1, FR-2, FR-4, FR4 Halogen Free, CEM-1, CEM-3, Hight TG, Aluminum, etc. with various types of substrates for a variety of applications including:

  • Military/Aerospace
  • Industrial
  • Commercial
  • Medical
  • Telecommunications
  • Consumer Electronics
  • RF/Microwave

In this page, we will focus on traducing standard FR4 based standard PCB, about other advanced PCB techniques, you can also refer to our other technical articles .
Opposite to prototype PCB, standard PCB fabrication is streamline manufacturing and qualified with regular tolerance and technical requirements. That means they are PCBs can meet large volume manufacturing process.

When can you release it as Standard PCB Board?

PCB Design That Has Been double Verified and Optimized by Prototypes PCB:
It is worth to have your PCB design to have an exam by a prototype production process before you release it to large volume production. By verify the prototypes work, it can detect out potential flaws in your design so as that you have time to modify it and then move it to production. Sometimes the PCB designer needs multi-times prototypes to thoroughly eliminate all the flaws before formal production. Except detecting the design flaws, prototypes can also explore out some potential weakness of production. Actually, it is unnecessary to invest lots of money on PCB prototypes, but just time is saved and you can put it in your application directly, tolerance is under more strict control and products are well tested before shipping to you.

When You Must Use PCB Prototype?.

New Products Development:

If you’re developing a new electronic product, it is better to exam your ideas by physical prototypes instead of the drawing on the paper. Why not choosing Weller Technology? We can make your concept into reality with prototype PCB. At Weller Technology, we make prototypes PCB by restrict process as manufacturing standard PCB. So, manufacturing prototype PCB at Weller Technology will help you to avoid the flaws that are possibly appeared in mass production, and the lead time can be reached within 24 hours at the fastest.

Get to Know More About PCB Prototype

Standard PCB Capability

FeatureWeller´s technical specification
Number of layers4 – 22 layers standard, 30 layers advanced, 40 layers prototype.
Technology highlightsMultiple layers of epoxy glass fiber bonded together with multiple layers of copper of varying thicknesses.
MaterialsHigh performance FR4, halogen-free FR4, low loss and low Dk materials
Copper weights (finished)18μm – 210μm, advanced 280μm / 8oz
Minimum track and gap0.075mm / 0.075mm
PCB thickness0.40mm – 7.0mm
Maxmimum dimensions580mm x 1080mm, advanced 610mm x 1400mm
Surface finishes availableHASL (SnPb), LF HASL (SnNiCu), OSP, ENIG, Immersion Tin, Immersion Silver, Electrolytic gold, Gold fingers
Minimum mechanical drill0.15mm
Hole TolerancePTH: ±0.075, NTPH: ±0.05
Solder Mask ColorGreen/Black/White/Red/Blue/Yellow
Silkscreen ColorWhite, Blue, Black, Red, Yellow
Min Annular Ring3.0mil
Board Thickness Tolerance±0.1mm – ±10%
Board Size Tolerance±0.1mm – ±0.3mm
Copper Thickness Tolerance+0μm +20μm
Inner Layer Copper Weight0.5oz – 3.0oz
Hole Plating Thickness20μm – 30μm
Plated Hole Size TolerancePTH: ±0.075
Non-Plated Hole Size ToleranceNTPH: ±0.05
Aspect Ratio1:10 (Hole size: Board thickness)
PCB Eelctrical Testing10V – 250V, flying probe, Or testing fixture
Impedance Tolerance±5% – ±10%
SMD Pitch0.2mm (8mil)
BGA Pitch0.2mm (8mil)
Chamfer of Gold Fingers20, 30, 45, 60
Solder Mask Bridge0.1mm
Minimum distance between plated holes and trace>=12 mil
Minimum distance between plated holes and trace>=12 mil
HDI builds1+N+1, 2+N+2, 3+N+3,4+N+4, any layer in R&D
Minimum laser drill0.10mm standard, 0.075mm advanced
Back-drillAvailable
Depth-control drillAvailable
Copper coin embeddedAvailable
Resistors embeddedAvailable
IPC Criteriaclass 2, class 3
MOQ1PCS

Why produce Standard PCB from Weller Technology

Weller Technology always offer keeps standard lead times that are consistently faster than the industry, to support our customer’s requirements to beat their competition to market. we rest our customers assured with top quality, skilled expert, competitive price and good after-sale service.

Quality assurance:
  1. Qualification by ISO 9001: 2015, IPC, and UL standards.
  2. Bare PCB 100% visual inspection and mechanical AQL on IPC-600 class2 or class 3
  3. 100% electrical testing before shipping
Manufacturing facility and People
  1. 30+ experienced engineers for R&D team and 20+ overseas sales for business team
  2. 7 SMT Lines (13 million chips per day)
  3. 3 Production Lines (1.2 million pcs per day)
Price and cost
  1. Optimized solution will be always available per your requirements.
  2. Accountable material and components sourcing support with reasonable price
  3. Whole industry supply chain
Good After-sale Service
  1. One-to-one timely customer order status feedback
  2. Monitor and manage production by ERP system

Find Weller Technology For Your PCB Project


We’ll do our best to get back to you ASAP.